Publicité
Les langues disponibles
Les langues disponibles
SNR10A & SSD10A SERIES ANGLE NUTRUNNERS & SCREWDRIVERS
Read and understand these instructions before operating this tool.
Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow these Safety Instructions!
Screwdrivers can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders.
Flying particles can cause eye injury.
Sockets, bits and adapters not made for power tools can break when used with power tools. Sockets, bits and adapters not made for
impact wrenches can break when used with impact wrenches.
Proper eye protection must be worn at all times by tool user and bystanders. Use only sockets, bits and adapters made for
power tools and that are in good condition with nutrunners, screwdrivers, pulse wrenches and ratchets wrenches. Use only
impact sockets, bits and adapters that are in good condition with impact wrenches. Keep hands away from sockets, bits and
adapters.
Broken sockets, bits and adapters can cause injury.
Power tools generate noise.
Ear protection must be worn when tool noise level exceeds 85 dBA. We also recommend that ear protection be worn when the
tool noise level is below 85 dBA. See the tool's information sheet for the noise level.
Prolonged exposure to noise can cause hearing loss.
Power tools vibrate.
Excessive vibration can cause injury. If numbness, tingling, pain or whitening of the skin occurs, stop using tool and consult a
physician. See the tool's information sheet for the vibration level.
Prolonged exposure to vibration can cause injury.
Worn, chiped, or cracked sockets, bits, and adapters can break.
Do not use worn, chiped, or cracked sockets, bits, or adapters.
Broken sockets, bits and adapters can cause injury.
Screwdrivers present a risk of entanglement.
Keep loose hair away from power tools and accessories. Keep hands away from moving parts of the tool and accessories.
Do not wear jewelry, loose clothing, or neckwear around power tools. Keep work area clear of cleaning rags and all items that
could become entangled with the tool.
Entanglements can cause injuries.
Driving screws creates dust.
Do not breathe dust created when driving screws. Use approved mask.
Breathing dust created when driving screws can cause injury.
This tool is not insulated for contact with electric power sources.
Do not use near live electric circuits. When driving screws into walls, be aware that they may have hidden electric wires.
Electric shock can cause injury.
This tool is not intended for use in a flammable or explosive atmosphere.
Do not use this tool in a flammable or explosive atmosphere.
Explosions and fire can cause injury.
Sudden and unexpected tool movement can occur when the fastener bottoms on the work.
Be sure your body position allows you to have control of the tool at all times. Make sure your footing is secure. Consult
manufacturer for proper reaction bar if movement is excessive.
When using a reaction bar:
• Be aware hands or feet can be injured if bar breaks.
• Keep hands from between bar and workpiece. Hands and fingers can be injured if caught between bar and work piece.
• Follow instructions supplied with reaction bar for proper installation and use.
Sudden and unexpected tool movement can cause injury.
Tools that are used with a suspension device can fall if they are not securely fastened to the device.
If the tool is used with a balancer or other suspension device, be sure the tool is firmly attached to the device.
Falling tools can cause injury.
Using excessive force on a tool makes it hard to control.
Do not force tool.
Hard to control tool can cause injury.
250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com
Form ZCE803
INSTRUCTIONS & PARTS LIST FOR
SERIAL"A"
SAVE THESE INSTRUCTIONS!
WARNING
When used improperly power tools can create hazardous situations.
Improperly used power tools can cause injury or death.
NUTRUNNERS & SCREWDRIVERS SAFETY
Original
Instructions
1
Form ZCE803
Date 2009July22/A
Page 1 of 26
Date 2009July22/A
Publicité
Table des Matières
Sommaire des Matières pour SIOUX SNR10A
- Page 1 Original Form ZCE803 Instructions Date 2009July22/A Page 1 of 26 INSTRUCTIONS & PARTS LIST FOR SNR10A & SSD10A SERIES ANGLE NUTRUNNERS & SCREWDRIVERS SERIAL“A” Read and understand these instructions before operating this tool. SAVE THESE INSTRUCTIONS! WARNING When used improperly power tools can create hazardous situations. Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow these Safety Instructions! Improperly used power tools can cause injury or death.
- Page 2 (10mm) I.D. LUBRICATION For maximum performance and tool life, an air line lubricator, set to deliver 2 drops per minute, is recommended. SIOUX No. 288 Air Motor Oil is recommended. If an airline lubrication is not used, it is recommended that the tool be oiled daily before use to improve performance. Add 2-4 drops of air motor oil and run the tool for 10-20 seconds to distribute oil through the tool.
- Page 3 *per PN8NTC1 *per ISO 8662 DECLARATION OF CONFORMITY We, Sioux, Snap-on Power Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products SSD10A & SNR10A SERIES to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:...
- Page 4 Übersetzung Der Original Anleitungen BEDIENUNGSANLEITUNG UND TEILELISTE FÜR SERIE SNR10A & SSD10A WINKEL MUTTERANZIEHMASCHINEN & SCHRAUBENDREHER SERIE“A” Lesen Sie diese Bedienungsanleitung, bevor Sie dieses Werkzeug in Betrieb nehmen. BEWAHREN SIE DIESE ANLEITUNG AUF! WARNUNG Unsachgemäßer Gebrauch von Werkzeugen kann zu gefährlichen Situationen führen. Jede Person, die dieses Werkzeug gebraucht, wartet, Zubehör auswechselt oder in der Nähe dieses Werkzeugs arbeitet, muss diese Sicherheitshinweise lesen, verstanden haben und befolgen! Unsachgemäßer Gebrauch von Werkzeugen kann zu Verletzungen oder zum Tod führen.
- Page 5 Sorgen Sie dafür, daß der Einschalter auf “Aus” steht, bevor Sie die Druckluft anschließen. Unerwartete Starts können zu Verletzungen führen Der Gebrauch von Zubehör, das nicht von Sioux Tools geliefert oder spezifiziert wurde, kann zu unvorhersehbaren Zwischenfällen führen. Verwenden Sie ausschließlich von Sioux Tools geliefertes oder empfohlenes Zubehör.
-
Page 6: Konformitätserklärung
*per PN8NTC1 *per ISO 8662 KONFORMITÄTSERKLÄRUNG Wir, Sioux, Snap-on Motorgetriebene Werkzeuge, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, erklären hiermit alleinverantwortlich, daß die Produkte SSD10A & SNR10A SERIES auf die sich diese Erklärung bezieht, mit den Anforderungen der folgenden Standards oder Normen oder Dokumenten übereinstimmen: EN 792, ISO 8662, Pneurop PN8NTC1 gemäß... - Page 7 Traducción De Las Instrucciones Originales INSTRUCCIONES Y LISTA DE PIEZAS PARA SERIE SNR10A & SSD10A ANGULO APRIETATUERCAS MECANICO & DESTORNILLADORES SERIE “A” Lea y entienda estas instrucciones antes de usar esta herramienta. ¡NO PIERDA ESTAS INSTRUCCIONES! ADVERTENCIA Una herramienta motorizada puede ser peligrosa si no se usa correctamente.
- Page 8 Siempre mantenga la herramienta lubricada correctamente y en buen estado. Utilice solamente aceite para motores neumáticos de Sioux No. 288. Ver la hoja de información de la herramienta para saber tener información sobre otros aceites o grasas que puede utilizar. No deje caer el extremo de la manguera en el suelo donde puede ensuciarse y transportar la suciedad a la herramienta.
- Page 9 Aplique entre 2 y 4 gotas de aceite para motores neumáticos y deje funcionar la herramienta durante 10-20 segundos para que el aceite se distribuya por toda la máquina. Lubrique los engranajes con grasa Sioux 1232A, usando la conexión de engrase, después de 100 horas de operación. MANTENIMIENTO Las paletas pueden oxidarse o pegarse si se acumula agua, polvo y otros contaminantes en la línea de aire.
-
Page 10: Conservare Queste Istruzioni
Traduzione Delle Istruzioni Originali ISTRUZIONI E LISTINO PARTI PER SNR10A & SSD10A SERIE ANGOLO AVVITATORI & CACCIAVITI SERIALE “A” Leggere attentamente queste istruzioni prima di usare l'attrezzo. CONSERVARE QUESTE ISTRUZIONI! AVVERTIMENTO Utensili a motore non usati correttamente possono creare condizioni di rischio.. Chiunque usi, mantenga, sostituisca accessori o lavori vicino a quest’utensile deve leggere attentamente e seguire queste istruzioni di sicurezza! L’uso diverso dal previsto di questi utensili a motore può... - Page 11 L’insufficiente manutenzione e lubrificazione degli strumenti può provocare guasti improvvisi. Mantenere sempre lo strumento adeguatamente lubrificato ed in buono stato. Utilizzare solo olio motore Sioux Air n. 288. Consultare il foglio informativo dell’utensile per determinare quali altri grassi ed oli utilizzare. Non lasciar cadere l’estremità...
- Page 12 *secondo PN8NTC1 *secondo ISO 8662 CERTIFICAZIONE DI CONFORMITA La Sioux, Snap-on Power Tools, Inc, con sede al 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, solennemente dichiara sotto la propria e sola responsabilità che i prodotti SSD10A & SNR10A SERIES...
-
Page 13: Securite Pour Visseuses & Clés
Traduction Des Instructions Originales INSTRUCTIONS & LISTE DE PIÈCES POUR SNR10A & SSD10A SÉRIE VISSEUSES & CLÉS ANGLE SÉRIE “A” Veuillez lire et comprendre ces instructions avant d'utiliser cet outil. CONSERVEZ CES INSTRUCTIONS ! AVERTISSEMENT Une utilisation incorrecte d’outils électriques risque d’engendrer des situations dangereuses. Toute personne susceptible d’utiliser, d’entretenir, de remplacer des accessoires ou de travailler à proximité de cet outil doit avoir lu et compris les instructions de sécurité... - Page 14 Vous assurer de lubrifier l’outil comme il se doit et le maintenir en bon état de fonctionnement. Utiliser seulement l’huile de moteur pneumatique Sioux Air Motor Oil No. 288. Consulter la fiche technique de l’outil pour connaître les autres huiles et lubrifiants recommandés.
- Page 15 PN8NTC1 ISO 8662 DÉCLARATION DE CONFORMITÉ La société Sioux, Snap-on Outils Mécaniques, Inc., située à : 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, affirme que les produits SSD10A & SNR10A SERIES dont cette fiche fait l’objet, sont conformes aux normes, documents normatifs et autres références :...
- Page 16 Vertaling Van De Oorspronkelijke Instructies INSTRUCTIES EN ONDERDELENLIJST VOOR SNR10A & SSD10A SERIE HOEK MOERSLEUTELS & SCHROEVEDRAAIERS SERIE“A” Zorg dat u deze instructies hebt gelezen en begrepen voordat u dit gereedschap gebruikt. BEWAAR DEZE INSTRUCTIES! WAARSCHUWING Bij verkeerd gebruik kunnen elektrische werktuigen gevaarlijke situaties teweegbrengen. Iedereen die accessoires gebruikt, onderhoudt of vervangt of nabij dit werktuig werkt, moet deze veiligheidsinstructies hebben gelezen, begrepen en volgen! Verkeerd gebruikte elektrische werktuigen kunnen letsel of de dood veroorzak.
- Page 17 Slecht onderhouden en slecht geölied gereedschap kan leiden tot plotselinge storingen. Zorg steeds dat de boor goed geölied en in goede conditie is. Gebruik alleen Sioux Air Motor Oil No. 288. Zie specificaties over het gebruik van andere oliën en vetten. Laat het uiteinde van de buis niet op de grond vallen, zodat stof en verontreinigende deeltjes de boor niet kunnen bereiken.
-
Page 18: Conformiteitsverklaring
*conform PN8NTC1 *conform ISO 8662 CONFORMITEITSVERKLARING Ondergetekende, Sioux, Snap-on Power Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, verklaart met inachtneming van de eigen aansprakelijkheid desbetreffend, dat de produkten SSD10A & SNR10A SERIES waarop deze verklaring van toepassing is, conform zijn met de hierna genoemde norm, normen en/of andere regels en voorschriften:... - Page 19 Översätt Från Original Instruktionerna ANVISNINGAR OCH RESERVDELSLISTA FÖR SNR10A & SSD10A SERIEN VINKEL MUTTERÅTDRAGARE & SKRUVMEJSLAR SERIE“A” Läs och förstå dessa anvisningar innan du använder detta verktyg. SPARA DESSA ANVISNINGAR! VARNING Felaktig användning av motordrivna verktyg kan förorsaka risksituationer. Alla som använder, underhåller, byter tillbehör på eller arbetar nära detta verktyg måste läsa, sätta sig in i och följa dessa säkerhetsanvisningar!
- Page 20 Illa skötta och dåligt smorda verktyg kan oförutsett sluta att fungera. Håll alltid verktyget väl smort och i god funktion. Använd enbart Sioux Air Motor Oil Nr. 288. Uppgifter om andra smörjämnen och oljor som ska användas finns i informationsbladet för verktyget. Släpp inte ned änden på slangen på golvet där den kan plocka upp smuts som kan komma in i verktyget.
-
Page 21: Försäkran Om Överensstämmelse
*enligt ISO 8662 FÖRSÄKRAN OM ÖVERENSSTÄMMELSE Vi, Sioux, Snap-on Power Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, förklarar under eget ansvar att produkterna SSD10A & SNR10A SERIES som denna försäkran gäller uppfyller följande standard eller standarder eller andra normgivande dokument:... - Page 22 SSD10A ANGLE SERIES SINGLE REDUCTION STALL DRIVE SCREWDRIVERS SERIAL “A” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Fig No Part No Description SDR-80 Front End Plate SP74130 Cylinder, Reversing Fig No Part No Description SDR-7 Rotor (7 tooth)(1600 RPM) 21501 Retaining Ring SDR-8 Rotor (10 tooth)(2000 RPM) 44660 Guide Ring SP74048 Vane Set...
- Page 23 SSD10A ANGLE SERIES DOUBLE REDUCTION STALL DRIVE SCREWDRIVERS SERIAL “A” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Fig No Part No Description SDR-29 Wear Plate SDR-94 Gear Case (Includes Fig 13) SDR-41 Double Reduction Gear Case (Includes Fig 13) 14333B O-Ring 10220 Ball Bearing SDR-80 Front End Plate SP74130 Cylinder, Reversing...
- Page 24 SNR10A ANGLE SERIES SINGLE REDUCTION STALL DRIVE NUTRUNNERS SERIAL “A” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Fig No Part No Description Fig No Part No Description 43564 Output Spindle (Includes Figs 1-4) SP74048 Vane Set 34666 Plunger SDR-11 Rear End Plate...
- Page 25 SNR10A ANGLE SERIES *Order Quantity As Required DOUBLE REDUCTION STALL DRIVE NUTRUNNERS FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN SERIAL “A” ORDERING PARTS Fig No Part No Description SDR-94 Gear Case (Includes Fig 11) SDR-41 Double Reduction Gear Case (Includes Fig 11) 14333B O-Ring 10220 Ball Bearing...
- Page 26 WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. WARNUNG Der durch Elektrosanden, -sägen, -schleifen und -bohren sowie durch andere Bauarbeiten anfallende Staub enthält Chemikalien, die nachweislich Krebs sowie Geburts- bzw.
- Page 27 ZCE803_revA used on SNR10A10S STALL 1000RPM AH NUT RUNNER SNR10A16S STALL 1600RPM AH NUT RUNNER SNR10A20S STALL 2000RPM AH NUT RUNNER SNR10A3S STALL 300RPM AH NUT RUNNER SNR10A5S STALL 500RPM AH NUT RUNNER SNR10A6S STALL 600RPM AH NUT RUNNER SSD10A10S STALL 1000RPM SD ANGLEHEAD SSD10A16S STALL 1600RPM SD ANGLEHEAD...