essentiel b EVT2238n Notice D'utilisation page 16

Run the power cord through the base, and then fit the main body of the fan to the base
8.
by lining up the mounting points. Clip the assembly in place, and then tighten it with the
screws.
ATTENTION to remove the base:
Unscrew the screws.
9.
Using a screwdriver, unclip the mounting points on both sides until the clips are released.
10.
Remove the main body by lifting it straight up.
11.
use
Plug the power cord into a suitable wall socket.
1.
Turn the speed selector to select the desired speed:
2.
16
V.1.0
use
– Stop; – Slow; – Fast; – Turbo; – Comfort