Cleaning The Appliance - WHITE BROWN BL 578 Mode D'emploi

notice BL 578-BL583:notice BL 578-BL583

CLEANING THE APPLIANCE

- To make the cleaning easier, rinse the accessories soon after
use, as soon as they are withdrawn from the appliance.
- Handle blades with care. They are extremely sharp.
- Always clean the appliance after use.
POWER UNIT
- Always switch off and unplug from outlet after use and before
cleaning operation.
- Never let the power unit, cable or plug get wet.
- Wipe the power unit with a damp cloth, then leave to air dry.
- Never use abrasives or immerse in water or other liquids.
BLENDER GLASS JUG
- Fill with warm water, fit the blender lid and the feeder cap, then
switch on top speed for 20-30 seconds.
- Empty, then rinse. If it is still dirty, use a brush.
- Wipe, then leave to air-dry.
- Do not leave the blender in water to soak and do not leave
water inside of it.
BLADES (8)
- From time to time, dismantle the blades to clean them.
- Remove the glass jug from its power unit, then turn it up side
down.
- Unscrew the cup base and dismantle the blades, the sealing
ring and the cup base.
- Dry thoroughly before reassembling.
- Check the blades are properly screwed.
All manuals and user guides at all-guides.com
1/10/07 11:44
18
Page 19
20