Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PERFORMING MAINTENANCE
Maintenance includes the following procedures:
• Replacing the ultraviolet UVC Lamp
• Replacing the filters
REPLACING THE ULTRAVIOLET LAMP
1. Unplug the Purifier's power cord from the electrical outlet.
2. Using index fingers, squeeze the locking tabs (FIG 2) inwards towards the center of the grill. Lift the grill up
and remove.
3. Rotate the Ultraviolet Lamp one-quarter turn, top to rear, (FIG 3) and remove lamp.
4. Insert the new Ultraviolet Lamp in place and install by rotating one-quarter turn (top-to-front).
5. Replace the top grill removed in previous step 2 by pressing it into position until
it locks. The aluminum reflector must be positioned over the UVC Lamp,
nearest the front of the unit (FIG 4).
6. Reset Ultraviolet Lamp timer by lightly pressing the related RESET button on the
Service Panel (located directly beside the "UV Lamp" LED indicator) with a pin or
similar object. The "UV Lamp" LED service light will turn green, and the 6
month timer will reset. This completes UVC Ultraviolet Lamp replacement
procedures.
UVClAMP�
-
�;
._ I
l
'
I
I
■
. ..
P/N 78010004000 Rev D 09/ 2 1
ROTATE
_
-
'='·
"Ji o
RlEMO'iiE
111 I
.JI
I
II
FIG2
I
FIG3
UYVJm/
FIG 4
Publicité
Chapitres
Table des Matières
