Publicité
HOOKUP DIAGRAM
Here are some examples for setting up the PA4EX to enhance your live sound.
Acoustic Instruments
Passive Instruments
With Active Preamps
With 1/4" Output
Line Level Audio
Preamp/DI for
Tone Shaping
Mic
(Optional)
Powered
Speaker
or
Powered
Monitor
Powered
Speaker
or
Powered
Monitor
SYNC Circuit of
Any PA Product
SYNC
SYNC
PA4EX Specifications
Accepted Inputs
Mic XLR Balanced, Line Level 1/4" Unbalanced
Frequency Response
48 Hz to 23 kHz
Signal to Noise Ratio
74 dB
21 dB
System Gain @ 1 kHz
38 dB
Channel EQ (high, low)
2.6 kHz and above, 0.9 kHz and below
IN: Accepts a pre-master volume signal from
another PA4EX or PA50/100/150product, or a line
level input from another audio product.
SYNC
OUT: Exports a pre-master volume signal to
another PA4EX or PA50/100/150product.
Phantom Power
17 V
Power Requirements
18 Vdc
PRODUCT WEIGHTS & DIMENSIONS
2.2 lbs (including adapter)
9.75" (L) x 6.375" (W) x 2.375" (H)
1 kg (including adapter)
24.5 cm (L) x 16.2 cm (W) x 6.2 cm (H)
Nominal line level of -10 dBV.
Channel volume knobs set at 3/4 full scale
All controls set at maximum, output at maximum
unclipped level, bandwidth 22 kHz
Line input to master output
MIC input to master output
Low boost/cut: +/- 9.8 dB at 63 Hz
High boost/cut: +/- 7.0 dB at 8.0 kHz
Recommended use: Daisy chaining to another PA4EX
for expanding the number of channels.
Recommended use: Linking to any PA50 / PA100 /
PA150 powered speaker or daisy chaining to another
PA4EX.
Available on all MIC inputs. Current limited to 5 mA.
Wall adapter is included.
Publicité
