To Use The Work Light; To Use The 12 V Dc Outlet; Maintenance; To Clean The Product - Hamron 002832 Traduction Des Instructions D'origine

3.5 To use the work light

1
Push in the work light switch and keep it pushed in
for 3 seconds. The work light comes on.
2
Push the work light switch again. The work light
flashes.
3
Push the work light switch again to make the work
light go off.
Note! The work light goes off automatically if the voltage in
the battery is too low.
4
Charge the battery in the product after operation.

3.6 To use the 12 V DC outlet

1
Open the cover on the 12 V DC outlet.
2
Connect the appliance that need power.
Note! The maximum output from the 12 V DC outlet is 200 W.
The 12 V DC outlet has overload protection with automatic
reset.
4

Maintenance

4.1 To clean the product

● Clean the product with a damp cloth after operation.
5

Storage

5.1 To put the product in storage

● Charge the battery in the product every 3 months if the
product is not in use.
6

Disposal

6.1 To discard the product

● Make sure that you follow local regulations when you
discard the product. Do not burn the product.
2022_001
7

Technical data

Technical data
Rated voltage
Capacity
Start current, max/nominal,
Protection rating
Operating temperature
Nominal pressure
Dimensions
Weight
12 V
17 Ah
900 A/400 W
IP20
0–50 C
o
17.2 bar
321x314x188 mm
7.4 kg
19