HP Pavilion MX50 Mode D'emploi page 28

5 Press the Select button to save your changes
and close the adjustment bar.
6 Press Exit to close the Moiré window.
Using the Status Window
The Status window is an information window that
displays the horizontal and vertical scan
frequencies, the resolution (for pre-set modes
only), and the serial number of the monitor.
To display the Status window:
1 In the OSD Advanced Menu window,
press the Plus (+) or Minus (–) button
to move to the Status icon.
2 Press the Select button to open the Status
window.
3 Press Select to close the Status window.
24
HP Pavilion MX50, MX70, and MX90 Multimedia Monitors
Filename: S01MXCUS.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: WASSER, Inc.
Revision #: 6 Page: 24 of 40 Printed: 12/15/00 02:51 PM
SERIAL NUMBER
AASDD12345
FV :70Hz
FH :31KHz
RESOLUTION:
640 X 480
E X I T
Restoring Factory Adjustments
I
To restore all parameters to the original factory
values:
1 Turn the power off.
2 While pressing the Plus (+) button, turn the
power back on.
Last Saved By: WASSER, Inc.
STATUS
EXIT