Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fitting kit
- 4 steel washers Z6
- 4 « silent block » with steel spacers
- 4 plastic washers Ø5
- 4 screws Bhc 5×15 (big head)
- 1 central part
Fitting instructions
- Attach the fitting brackets as shown on the photos by inserting the Z6 washers (those with the largest inside
diameter) between the brackets and the engine casing.
- Fit the « silent block » to the belly pan, by placing the steel flange towards the outer part of the belly pan.
- Assemble the 3 sections of the belly pan by placing the central part inside the 2 other sections, and then secure
them using the 4 BHc 5×15 screws, the plastic washers (beneath the screw heads), the L5 steel washers (on the
inside) and the nuts.
- Place the belly pan on the motorcycle and attach it using the 4 BHc 6×30 screws.
Once fitted, the belly pan must have no contact with motor and has to be far
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data of our
painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Care to excessive clampings which may damage or break our plastic accessories and aluminium screws.
* Belly pans will be neither retaken nor exchanged in case of rubbing during a "sports" driving, or during the clearing of pavements, uneven road surfaces ... The fitting of Ermax accessories is planned for a normal road use.
* Move hoses so that they do not fall inside the belly pans. Any deterioration due to flows of corrosive products is not guaranteed.
Left-hand side fitting bracket
enough from complet exhaust system
ADAPTABLE ON BMW F 800 R 2009 → ∞
- 4 fitting brackets
- 4 screws BHc 6x30 big head black
- 4 steel washers L5
- 4 Nylock nuts M5
« CAUTION »
FITTING INSTRUCTIONS
ERMAX BELLY PAN
Estimated fitting time : 30 mn
Right-hand side fitting bracket
Publicité
