Publicité
Les langues disponibles
Les langues disponibles
CAUTION! Before use, check that there is no gasoline or vapors in the engine
compartment. Run the unit for at least five minutes.
3.3. Cleaning and maintenance
a)
Disconnect power and cool the unit completely before any cleaning,
adjustment, accessory replacement, and when not in use.
b)
Store the unit, when not in use, in a dry and cool place protected from moisture
and direct sunlight.
c)
Do not spray the unit with a stream of water or immerse it in water.
d)
Make sure that no water enters through the ventilation openings in the casing.
e)
Clean the ventilation openings with a brush and compressed air.
f)
Perform regular inspections of the unit checking technical fitness and any
damages.
g)
Use a soft, damp cloth for cleaning.
h)
Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) for
cleaning, as these may damage the surface of the material from which the unit
is made.
i)
Do not clean the unit with acidic substances, medical products, diluent, fuel,
oil or other chemicals as this may cause damage to the unit.
DISPOSAL OF USED UNITS.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this unit are
recyclable according to their marking. You will be making an important
A. Fan
B. Red wire
C. Black wire
D. Switch
E.
Fuse
Publicité
