TKH TR0802P Guide De Démarrage Rapide page 6

EN
Applicable Models
This manual is applicable to the models listed in the following table.
Symbol Conventions
The symbols that may be found in this document are defined as follows
Symbol
Safety Instructions
Proper configuration of all passwords and other security settings is the responsibility of the installer and/or

end‐user.
In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and

region. Please refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100~240

VAC or 12 VDC according to the IEC60950‐1 standard. Please refer to technical specifications for detailed
information.
Do not connect several devices to one power adapter as adapter overload may cause over‐heating or a fire

hazard.
Please make sure that the plug is firmly connected to the power socket.

If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then

please contact the service center.
Quick start guide - Network Video Recorder - TR0802P & TR1602P
Network Video Recorder Quick Start Guide
Serie
TRxx02P
Description
Provides additional information to emphasize or supplement important points of
the main text.
Indicates a potentially hazardous situation, which if not avoided, could result in
equipment damage, data loss, performance degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will result in
death or serious injury.
Models
TR0802P
TR1602P
.
4
4