Willtek 4100 Série Manuel De L'utilisateur page 183

Codage utilisé dans les procès-verbaux
Traffic channel = A16
Pre-att. defined by AUTOTEST = A20
410x RF output level = A21
Broadcast channel = A22
Pre-att. defined by MS TYPE = A23
Dialled number = A30
Power/Time Template = A31
6-30
Identifier A16;
Result 0
TCH 27
A FAIL result stands for a failed handover signalling sequence.
A PASS result means a setting or a correct signalling sequence.
Identifier A20;
RX value 1.5
TX value 1.5
Identifier A21;
Value –60.0
Identifier A22;
Value 63
Identifier A23;
Channel ID A
Channel type T
Channel 63
RX value 1.5
TX value 1.5
Identifier A30;
Result 0
Dialled digits 123456789
Reference digits 123456789
Identifier A31;
Total result 0
Models 4107S only
Total result 0
Rising edge res. 0
Middle area res. 0
Falling edge res. 0
Burst information 1
(answer 1 to 3 in
asynchronous
mode only)
Willtek 4100
0=PASS, 1=FAIL
Traffic channel
Dimension dB
Dimension dB
Dimension dBm
A, B, C, D, E ,F, G, H or I
T=Traffic channel
B=Broadcast channel
Dimension dB
Dimension dB
0=PASS, 1=FAIL
Transmitted from
mobile
0=PASS, 1=FAIL
0=PASS, 1=FAIL
0=PASS, 1=FAIL
0=PASS, 1=FAIL
0=PASS, 1=FAIL
0=No information
1=With training sequ.
2=All other GMSK bursts
3=Contin. GMSK signal