Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
ENGLISH
HANDHELD MIC
PARTS DESCRIPTION
1
1.
Grill (Capsule inside)
2. Power/low battery indicator
3. Power ON/OFF/MUTE Switch
4. Battery Compartment/Cover
OPERATION
1.
Open battery cover. Install the provided 2pcs 1.5V AA batteries and
then close the cover. Pay attention to the correct polarity.
2. Push power switch to ON position, power indicator should flash once
briefly indicating that the transmitter has sufficient power. If the power
LED indicator stays on, it indicates that the battery has insufficient
power and should be changed. If the power LED indicator does not
light at all and the transmitter does not work, it indicates the battery is
dead and you should change the battery.
3. Now receiver RF indicator should light (Please confirm frequency of
microphone is the same as that of receiver before operation).
4. Push power switch to MUTE position to mute the sound.
5. During operation if the power indicator lights red, this indicates the
battery is low. Please replace new battery.
6. If the microphone is not going to be used for any length of time, push
power switch to OFF position and remove the battery.
VHF-01, 02 manual
geminisound.com
•
4
2
3
7
Publicité
