Tripp-Lite U234-005-R Manuel D'utilisation page 4

System
Requirements
PCI Card Requirements:
• IBM ® PC Pentium II 266MHz CPU or higher or
compatible system
• Available PCI slot
• CD ROM drive for software
• Windows ® 98/98SE or higher
Hardware
Installation
1) Turn off PC, unplug power cord, disconnect all
peripherals and open the PC case.
2) Find the PCI slot on the motherboard, remove any
add-on card blocking easy access to the PCI slot.
3) Remove the USB 2.0 PCI card from the anti-static bag
and push it into the first empty PCI slot.
Note: There is only one way that your USB 2.0 PCI card can fit into the
slot correctly.
4) Re-install any add-on card that was removed, close the
PC case, re-connect all peripherals and plug the power
cord back in.
All manuals and user guides at all-guides.com