Publicité
Les langues disponibles
Les langues disponibles
8706152
8 in. Bench Grinder
SPECIFICATIONS
Horsepower
Wheel Size
Arbor Size
No Load Speed
Voltage Rating
Current Rating
Frequency Rating
INTRODUCTION
The 8 in. Bench Grinder is used for hand held grinding, sharpening and
cleaning. It has a 3/4 HP motor for quiet, smooth performance. The tool rests
are adjustable as are the safety eyeshields. The heavy duty cast aluminum base
is predrilled to bolt the grinder to a workbench.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice
is an alert that there is a possibility of property damage, injury or death if certain
instructions are not followed.
2
8 in. Bench Grinder
3/4 HP
8 in.
5/8 in.
3,450 RPM
120V
4.8A
60Hz
For technical questions call 1-800-665-8685
V4.0
Publicité
