Publicité
Les langues disponibles
Les langues disponibles
NOTE: The Power Burner Big is delivered with an empty gas tank!
Please read all instructions and warnings before use!
FOR THE FIRST USE:
· Fill the tank with butane gas (Berner 414185 or 414186).
· Ensure the gas control knob is tight to OFF (right) position before start
refilling.
· To fill or refill, turn the Power Burner Big upside down. Place the butane
can above and connect to the filling valve.
· Press now the butane can firmly into the filling valve.
· If the gas comes out of the tank, the tank is filled with gas.
NOTE: After filling, the Power Burner Big should have a few minutes
to stabilize the gas inside the tank. Butane gas will not work correctly
below 5°C. Because the Butane boiling point is +- 0°C.
HOW TU USE:
1. Rotate the safety lock ring counterclockwise (left) fully to ON position.
2. Rotate the gas control knob counterclockwise (left) till hearing the gas
flow sound.
3. Depress the ignition button to ignite. You may see the blue flame
immediately.
4. The flame size can be adjusted by rotating the gas knob control. Rotate
the gas knob to the LEFT for higher flame or to the RIGHT for lower
flame.
5. The flame intensity / width can be adjusted by rotating the air control
ring.
NOTE: for ignite precisely, please rotate the air control ring back to
the original setting (the air hole completely exposed) after use.
6. To turn off the Power burner big, simply rotate the gas control knob fully
clockwise (right).
(EN)
Publicité
