Publicité
Les langues disponibles
Les langues disponibles
T328 Operation
a) T328 Charging Case:
1. On: press Power Button (see #3 on Product Map above) to turn the T328 ON
2. Off: the T328 power case will auto-power OFF after 30 seconds of idle time
NOTE: LED on charging case is to indicate battery status. Red LED indicates that the charging
case is re-charging, while Blue LED indicates that the charging case is charging the TWS
earbuds.
b) T328 TWS Earbuds:
1. On: press & hold the multi-function buttons of Left & Right earbuds (see #5 & #8 on Product
Map above) to turn power ON. T328 will automatically pair between Left & Right earbuds
(allow up to 30 seconds for Left & Right earbuds to auto-pair during initial use).
2. Once T328 TWS earbuds are paired to each other, it is automatically in WIRELESS mode.
NOTE: previously paired devices will automatically connect to the T328
3. Off:
a. Press & hold the multi-function button on one of the TWS earbud, or
b. Both earbuds will automatically power OFF after 30 seconds of idle time
T328 Wireless Earbud Pairing
a) Stereo Mode:
1. Remove both earbuds from the charging case
2. The T328 earbuds will automatically power ON. If blue & red LED do not appear on the
earbuds, press & hold the multi-function buttons on both Left & Right earbuds (see #5 & #8 on
Product Map above) to power ON. Primary earbud will flash red & blue LED quickly while
Secondary earbud will flash blue LED intermittently
Left & Right earbuds to auto-pair during initial use).
3. Enable Bluetooth function on your electronic device. Search for SPECTOR T328 & pair the
devices (flashing blue LED on each earbud indicates that the T328 has been successfully
paired to your audio device)
4. To DISCONNECT from wireless pairing, press & hold multi-function button on one of the
earbuds until LED is power OFF.
NOTE: the included silicone earbud strap (see #13 on Product Map above) can be placed onto
the T328 TWS earbuds to prevent loss of earbuds when you are on the go.
b) Mono Mode:
1. Remove one earbud from the charging case
2. The T328 earbud will automatically power ON. If blue & red LED do not appear on the
earbud, press & hold the multi-function buttons on Left or Right earbud (see #5 & #8 on
Product Map above) to power ON.
3. Press & hold the multi-function buttons on earbud (see #5 or #8 on Product Map above) to
power ON.
4. Enable Bluetooth function on your electronic device. Search for SPECTOR T328 & pair the
devices (flashing blue LED on the earbud indicates that the T328 has been successfully
paired to your audio device)
5. To DISCONNECT from wireless pairing, press & hold multi-function button on the earbud until
LED is power OFF.
NOTE: repeat step 1-3 to pair the other T328 earbud with a different smartphone device.
10
Microphone (Right Earbud)
11
Earbud Charging Receptors
12
Wireless charging slots (Earbuds)
13
Silicone earbud strap
(NOTE: allow up to 30 seconds for
Publicité
