Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
1. Attach LEFT LEGS #7 and RIGHT LEGS #8 to the corners of the TABLE BODY #5 as shown
below using 1-1/4" BOLT #1 and 5/16" FLAT WASHER #2. Note: The table is assembled upside
down.
2. Thread one LEG LEVELER #15 onto each LEG.
3. Attach each LEG END PANEL #6 to LEGS with 1" BOLT #3 and 1/4" FLAT WASHER #4.
4. Attach each LEG SIDE PANEL #9 to LEGS with 1" BOLT #3 and 1/4" FLAT WASHER #4.
Carefully turn table over.
4
Publicité
