Publicité
Les langues disponibles
Les langues disponibles
HW912 Product Map
HW912 Operation
1. ON: Press the
the HW912 is power ON
2. OFF: Press the
To charge the HW912
1. Insert the micro USB of the charging cable into input port of HW912 (see #3 from Product Map) &
connect USB output to a wall adapter (not included).
2. A solid red LED (see #3 from Product Map) will be lit to indicate that the HW912 is being charged
(the LED will automatically power OFF once the HW912 is 100% fully charged).
3. To stop charging, disconnect the charging cable from the HW912.
NOTE: A red LED under ON/OFF Power Button (see #2 from Product Map) will quickly flash to indicate
that HW912 battery power is less than 20% & will automatically power OFF.
To refill HW912 with hand soap or hand sanitizer
1. Twist open the container
2. Insert sanitizer or soap (not included)
3. Twist close the container
NOTE: make sure the air tub is connected to the HW912 prior usage
ON/OFF power button once (see #2 from Product Map). A blue LED indicates that
ON/OFF power button once. A red LED indicates that the HW912 is power OFF.
No
Description
1
Touchless infrared sensor &
nozzle
2
ON/OFF Power Button
3
Micro-USB input port
4
350mL refillable hand
sanitizer/soap container with air
tube
Publicité
