How To Use - Midea MEK17DW-W Mode D'emploi

How to use

For the first time to use or no use for a long time, it is recommended that
you fill to the maximum level mark with fresh tap water, boil and empty th
kettle at least
2 times to clear kettle of any tiny particles.DO NOT drink initial boiled water.
1. Press the lid lock on the handle , and you can open it.
2. Remove the kettle from the base to the filling place. Fill the kettle with
desired amount (no less than the minimum and no more than the
maximum.) Put back the lid; place the kettle back on the base unit.
3. Connect the plug into a power outlet (120V,AC), switch the kettle on by
pressing down the switch. The light will illuminate to indicate the kettle is
heating.
4. The kettle will automatically switch off once the water has boiled and the
neon light goes off.
5. Lift the kettle from the base, and you can pour out the water into
container.
Cleaning
To prolong the kettle's life, please clean the mineral
deposits in the kettle regularly.
Always unplug from the plug socket and allow to cool
down before cleaning.
DO NOT use chemical, steel wool, or abrasive cleaners
to clean the outside of the kettle, as these will scratch
the surface and fade the outside color.
1. Fill the kettle with 0.5L white vinegar and the remainder with water
and allow to stand for over 1 hours ;
2. Empty the solution from the kettle. Wipe off the deposits remained
with damp cloth
5