Nyne NH-6500 Manuel Utilisateur page 22

Note:
Make sure that NH-6500 and the
device to be paired are located
feet or 10m).
1
Press on the remote control
on the top panel
repeatedly) to enter Bluetooth
mode.
2
Enable the Bluetooth function on
your device to be paired with
NH-6500.
☞
The device to be paired with
NH-6500 enters Bluetooth
searching mode.
3
Press and hold
panel) to enter pairing mode.
☞
"SCAN" is displayed on the LED
☞
The indicator on the top
☞
After a while, "NH-6500" is
displayed in the list of Bluetooth
equipment on the device to be
paired with NH-6500.
4
Select "NH-6500"on the device
to be paired with NH-6500 to
password "0000").
22 EN
NYNE NH-6500_User Manual_A5.indb 22
on the remote
on the top
☞
After successful pairing and
connection, the
Tip:
time connection, if your paired
device fails to connect with
NH-6500 automatically the next
time, you may need to select the
device name of NH-6500 from the
list of Bluetooth equipment on your
paired device to set up Bluetooth
connection again.
Play music from a Bluetooth connected device
Notes:
To play music wirelessly through the
multifunction Bluetooth docking
speaker, make sure that your
device paired with NH-6500 is
A2DP. Check the user manual of
your paired device for details.
Make sure that Bluetooth
connection has been set up
between the paired device and
NH-6500.
indicator on
5/19/2012 6:13:30 PM