BEHA UNITEST Hexagon 55 Mode D'emploi page 35

5.3 Continuity Test
Prior to any continuity test, it must be ensured that the resistance to be
measured is not live. Failure to comply with this prescription can lead to
dangerous corporal user injuries or cause instrument damage.
Additionally, foreign voltages falsify the measurement result.
Position measurement function selection switch to
range.
Connect the black test lead to the COM socket and the red test lead to
the socket.
Connect test leads to UUT.
Read the measurement result displayed on the screen.
Acoustic indication by signal sound if resistance < 1000 Ω
Continuity Test
-
measurement
+
35