Publicité
Les langues disponibles
Les langues disponibles
General Features
E
N
G
-
Smoke detection system made of an emitter and a receiver, which thanks to a reflecting panel
placed at max 100 meters distance, can detect and determine the quantity of smoke in the
protected area.
-
The board is equipped with a view-finder, placed on one side, allowing a rough alignement
with the reflector given within.
-
The beam is equipped with a device (Led/display module) to use for calibration and check of
signal received.
-
At first supplying, the board makes a self-calibration which will be repeated every 2 hours in
order to compensate masking caused by dust on lenses and reflector.
-
Adjustable sensitivity to get a better intervention threshold according to distance.
-
The beam has alarm outputs as well as fault condition and consumption-alarm outputs, which
allow connection to standard fire control units.
-
The beam has a serial interface in order to connect up to 4 units to the remote panel (BR100)
showing the same indications as shown by led/display module and leds.
8
7
6
5
4
3
2
1
S1
ON
1
2
3
4
S2
S3
S4
LD2
S9
LD3
LD4
S7
S8
NC
NC
C
C
OUT
NO
NO
ALLARME
GUASTO
+F
S5
S6
-
A
B
+
- 14 -
IST0570V3.1
Publicité
