Specifications; Factory Preset Timings; Troubleshooting - Daewoo 715B Mode D'emploi

SPECIFICATIONS

CDT Size 17-inch
Diagonal visible image area 16.2-inch
Dot Pitch 0.28 mm
Synchronization Horizontal 30 - 70 KHz
Vertical 50 - 160 Hz
Plug and Play DDC1/2B/CI
Power Saving EPA, VESA DPMS, Nutek Compliant
Power Source 100-240 Vac, 50/60Hz (Free Voltage)
Power Consumption 95W
Dimension-W x H x D 420 x 453.5 x 429mm
(set with stand)
Weight-unpacked (lbs/Kg) 33.7/15.3
Operating Temperature 10 ~ 40¡C /50 ~ 104¡F

FACTORY PRESET TIMINGS

Resolution
Mode
(dots lines)
X
VGA 480 640 480
X
VESA VGA 75 640 X 480
VGA 400 720 400
X
VESA 46K 800 600
X
VESA SVGA 85 800 600
X
VESA 60K 1024 768
X
VESA 1024/85 1024 768
X
VESA 1280/60 1280 1024
X
The above timings are adjusted on the best display image condition.
English - 12
H.Freq (KHz) V.Freq(Hz) Remark
31.5 60 Non-interlaced
37.5 75 Non-interlaced
31.5 70 Non-interlaced
46.9 75 Non-interlaced
53.7 85 Non-interlaced
60.0 75 Non-interlaced
68.7 85 Non-interlaced
64.0 60 Non-interlaced

TROUBLESHOOTING

Symptom
No picture. Check if POWER SWITCH and COMPUTER
POWER SWITCH are in the on position.
Check if the signal cable is correctly connected to
the video card.
Check if the pins of D-sub connector are not bent.
Check if the computer is in the power saving mode.
POWER LED is not Check if POWER SWITCH is in the on position.
lit.
Check if the power cord is correctly connected.
Image is unstable. Check if the signal cable is suitable to the video card.
Image is not Adjust H & V Size or H & V Position to get the
centered, too small proper image.
or too large.
Picture bounces or a Keep the devices that may cause electrical
wave pattern is interference away from the monitor.
present in the
picture. See the FCC information at the front cover of the
manual.
Color looks blotchy. Operate Degauss once.
Picture is blurred. Adjust Contrast and Brightness.
Operate Degauss once.
Edges of available Adjust Pincushion/Trapezoid/Pin Balance/
area on the screen Parallelogram/Pin Coner Top/Pin Coner Bottom/
are not straight. Pin Balance Top/Balance Bottom.
English - 13
Check