Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
1. Grasp both bottom Legs of the
Freezer Paper Dispenser and pull
them apart until the unit locks open
(FIGURE 1).
2 Install the 4 Rubber Feet into the
pre-drilled holes on the Freezer
Paper Dispenser Legs (FIGURE 2).
3. To mount the Freezer Paper
Dispenser to a counter or a wall, use
appropriate screws (not supplied) to
attach to the counter through the pre-
drilled holes on the Freezer Paper
Dispenser Legs.
4. While holding the Wooden Dowel,
open the spring-loaded Cutting Arm
until it locks down (FIGURE 3).
5. Remove the Wooden Dowel and
slide it through the center core of the
Freezer Paper.
6. Carefully install the Wooden Dowel
into the Dowel Sockets (FIGURE 4).
7. Push the Cutting Arm up until it
rests against the Freezer Paper.
Legs
Leg
Wooden
Dowel
FIGURE 1
FIGURE 2
Pre-Drilled
Hole
Rubber
Foot
FIGURE 3
Dowel
Socket
Cutting
Arm
FIGURE 4
3
Publicité
