Kodak WOS801 Manuel D'installation page 3

MAINTENANCE, CLEANING AND RECYCLING
- Always unplug the product from the mains before carrying out
any maintenance.
- Never use abrasive or corrosive substances to clean the
products.
- Use a soft, slightly damp cloth.
- Never use an aerosol to spray the product as this may damage
the internal workings.
This logo indicates that devices which are no longer in
use must not be disposed of as household
waste.They are likely to contain hazardous substances
which are dangerous to both health and the
environment.Return the equipment to your local
distributor or use the recycling collection service
provided by your local council.
Liz Invest SAS, 10 Route de Lalande, 33450 Montussan,
FranceDeclare under our own responsibility that the
product WOS801 complies with :
EMC Directive
Low Voltage Directive
Red Directive
RoHS Directive
References to the relevant harmonised standards used or
references to the other technical specifications in relation
to which conformity is declared:
EN61000-3-2:2014; EN 61000-3-3:2013; EN301 489-1 V1.9.2;
EN301 489-3 V1.6.1.;
EN50130-4:2011+A1:2014
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN300 220-1 V2.4.1 (2012-05); EN300 220-2 V2.4.1 (2012-05);
EN62321:2009
(2014/30/EU)
(2014/35/EU)
(2014/53/EU)
(2011/65/EU)
Authorized representative:
David Haddad, President
David Haddad
24-Apr-2017