Publicité
Les langues disponibles
Les langues disponibles
Major operations and their functions (continued)
REC terminal
Input terminal to start recording. Not available dur-
ing timer recording.
EMERGENCY terminal
Input terminal initiating immediate shift to EMER-
GENCY recording mode compulsorily.
MODE OUT 1 ~ MODE OUT 5 terminals
Output terminal to indicate the unit's current mode.
Select the unit's condition by MODE OUT 1 ~ MODE
OUT 5 setting in the <REAR TERMINAL SETTINGS>
menu.
CALL OUT terminal / CALL OUT GND terminals
This is the ISOLATION output terminal. Information
that can be transmitted externally consists of CALL
OUT settings made on the <REAR TERMINAL SET-
TINGS> menu screen as well as fixed output set-
tings.
DC 5V OUT terminal
Will only output when both the MAIN switch and
POWER button are ON. The maximum electric cur-
rent is 30mA.
14. RS-232C connector
This connector is used to connect to host device with
RS-232C connector. This unit can be controlled by
another device through this connector.
15. ETHERNET connector
Use a 10BASE-T cable to connect to the Ethernet
terminal. Please use the cable adapted to
10BASE-T. DUPLEX MODE is HALF DUPLEX.
RECEIVE indicator
Illuminates when the unit is receiving a signal.
SEND indicator
Illuminates when the unit is transmitting a signal.
16. SCSI connector
This connector is used to connect to peripheral re-
cording device.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
6
Inserting/Ejecting Compact Flash Card
Before using the Card, read the cautionary notes
described in the manual included with Compact Flash
Card.
<Inserting Card>
1. Remove the COMPACT FLASH slot cover attached to the
unit.
2. Please turn down the side which contains notch in right and
left, securely insert the Card until the CFC EJECT button pops
out.
Do not eject the Card when copying/restoring, copy-
ing/loading menus, or immediately after inserting the
Card. The Card or the contained data may become
damaged.
Securely insert the Compact Flash Card. Other-
wise, the unit may not work properly.
Please use the Compact Flash Card which we rec-
ommend. When a non recommended Card is used,
there is a possibility that reading and writing of data
may not operate correctly.
For usable Compact Flash Card check with your
dealer of purchase.
When using a new Card, be sure to execute CFC
DATA CLEAR in the <INFORMATION/SERVICE>
screen.
<Ejecting Card>
1. Press the CFC EJECT button and eject the Card.
2. Attach the COMPACT FLASH slot cover.
DIGITAL RECORDER DX-TL 2500
SPLIT/
SEQUENCE
ZOOM
SPOT
TIMER
0
POWER
TIMER
VIDEO OUT AUDIO OUT
ZOOM
OUTPUT B
TIMER
0
POWER
TIMER
VIDEO OUT AUDIO OUT
CLEAR/
ENTER/
REW
FF
10 10
11
12
13
14 14
15 15
16 16
REC/STOP
ARCHIVE
PRE ALARM
M-DET
EMERGENCY
ACCESS
COM
LOCK
PAUSE/
COMPACT FLASH
STOP
REV. PLAY( )
PLAY( )
MAIN
SHUTTLE HOLD
WARNING
SET UP
SEARCH
COPY
ALARM
PLAY DEVICE
RESET
INTERRUPT
CFC
MENU
EJECT
ARCHIVE
OUTPUT A
PUTPUT B
COPY
MULTIPLEXER
CFC EJECT Button
ACCESS
PRE ALARM
M-DET
EMERGENCY
COM
COMPACT FLASH
CFC
Compact Flash Card
Publicité
