Telcoma EVO600 Instructions Pour L'utilisation Et La Programmation page 31

CHARACTERISTICS AND PARTS DESCRIPTION
EVO series gearmotors are extremely versatile units for the automation of sliding gates up to 1200Kg.
This manual covers three models with different powers and gear reducers but the same dimensions and installation procedure;
electrical connections and programming are also standardised.
Parts description (fig. A)
1. motor cover
2. magnetic limit switch sensors
3. pinion guard
4. pinion
5. side covers
6. ECU
7. ECU support
8. transformer
9. motor height adjustment stud bolt
TECHNICAL DATA
MOTOR
Power supply voltage
Motor voltage
Max. motor current
Max. absorbed power
Maximum torque
Max. torque during the starting
Max. thrust force
Max. gate weight
Max. gate speed
Duty cycle intensity
Encoder
Magnetic limit switch
Protection class
Operating temperature
Weight
Grease lubricant
Oil lubricant
Control unit
Control unit power supply
Electronic torque limiter
Electronic deceleration
Electronic motor brake
Heater power supply
Max. heater output
Heater t.on/t.off
(*) Max. weight of door in smooth and balanced operating conditions on opening and closing.
These application limits CANNOT be guaranteed if using NON conforming doors, or components that are worn and not
subject to the correct maintenance.
PRELIMINARY CHECKS AND IMPORTANT SAFETY NOTES FOR INSTALLATION
Before proceeding with installation, checks should be made on:
1. the solidity of the existing structure (posts, hinges and leafs) in relation to the force generated by the motor.
2. the provision of mechanical stops of suitable strength at the ends of the gate opening and closing strokes.
3. the bottom wheel/rail system and upper roller/guide system to ensure there is no rubbing or excessive clearance.
4. the disabling of any manual locks.
5. the condition of any wiring already installed in the system.
U.M. EVO600
Vac
Vac
A 3,5
W 800
Nm 21
µF 16
N 540
Kg 600*
m/min 10
% 40
YES
YES
IP
°C
Kg 9,5
TS10
/
mod.
Vac
Vac /
W
/
°C /
10. motor fixing crews
11. motor release lock
12. motor release lever
13. motor
14. encoder
15. oil bleed screw (EVO800/1200/1200R)
16. oil plug (EVO800/1200/1200R)
17. motor connection (EVO800/1200/1200R)
18. brackets with limit switch magnet
EVO800 EVO1200
230
230
3,5
800
24
20
640
800*
10
60
YES
YES
44
-20 +55
10
/
TS20
T101
230 ± 10%
YES
YES
YES
/
/
/
EVO1200R
5,5 5,5
1100 1100
45 45
20 20
1200 1200
1200* 1200*
10 10
60 60
YES YES
YES YES
10 10,5
/ /
TS40 TS40
/ 110-230
/ 20
/ 4-5/10-12
GB
30