Hudson Grills RC3218 Instructions D'assemblage Et D'entretien page 27

4. When this step completed, secure the rear burner
cover to rear panel of the burner box with screws you
removed.
Change to 3.05m (10 ft.) NG hose
Take the regulator off from the manifold and replace it with 3.05m (10 foot) natural gas hose. Please make
sure the hose is securely fastened. (Fig. 15)
Adjust valve control screw
Pull all the knobs off of valve stems.
For main burners and side burner, adjust the screw in the valve
hole using the flathead screwdriver. Turn screws two complete
turns counter clockwise. (Fig. 16)
For rotisserie burner, adjust the screw in the valve using the
flathead screwdriver. Turn screw two complete turns counter
clockwise. (Fig. 17)
To complete conversion, re-install all knobs, return heat
diffusers to firebox, followed by the grates and warming
rack.
Valve hole
27
Fig. 15
Fig. 16
Fig. 17