Garmin Bail Instructions page 3

Item Wire Color
Red
Black
Yellow
Blue
Green
3
Insulate and secure unconnected wires.
Installing the Device in the Mount
Before you place the device in the mount, ensure that the metal
contacts on the device and the mount are dry. Moisture on the
contacts causes equipment damage. Use the weather cap to
keep the mount cradle dry.
1
Place the weather cap
2 Place the bottom of your device into the cradle
3
Tilt the device back until it snaps into place.
4
Using the security screw tool, tighten the security screw
the top of the mount .
Installation Instructions
Wire Function
Power
Power
Serial data input
Serial data output
Serial ground wire
Audio jack
NOTICE
in the storage area on the mount.
.
Removing the Device from the Mount
1
Loosen the security screw.
2
Press the button
device.
3
Lift the device out of the mount.
4
Place the weather cap
on
on the side of the mount to release the
on the cradle.
3