Télécharger Imprimer la page

Schwaiger WALED 10 Mode D'emploi Et Consignes De Sécurité page 15

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
The battery takes about 2 to 3 hours to charge. A status LED
on the magnetic connector hub indicates the charging status.
The status LED will light green whenever the battery is being
charged. The status LED changes to red once the battery is
fully charged.
STATUS LED
*Green*
Is charging
*Red*
fully charged OR the Flare and Hun are misaligned
and need to be adjusted.
7. Use
Press on the on/off button to switch on the LED warning light;
the light emits a 360° rotating beacon light when turned on.
Press the on/off button again to change through the follow-
ing 9 light modes in sequence.
LIGHT MODE
The battery will be fully charged with either charger within
2-3 hours. When fully charged you may expect these run
times:
No. 1 – 360° rotation
#2 – Quad Flash
#3 – Single Blink
#4 – Alternating Blinks
#5 – SOS Rescue (Morse Code)
#6 – Steady on – high
#7 – Steady on – low
#8 – 2 LED Flashlight
#9 – 4 LED Flashlight
USER MANUAL
RUN TIME
7 hours
7 hours
50 hours
7 hours
12 hours
4 hours
30 hours
7 hours
5 hours
15
15

Publicité

loading

Produits Connexes pour Schwaiger WALED 10