Publicité
Les langues disponibles
Les langues disponibles
3-ASSEMBLY
3-ASSEMBLY
ASSEMBLING PELLET LEVEL SENSOR
J
The pellet sensor is a fuel reserve indicator that warns the user that the pellets are finishing.
With the tank empty, lift the pellet loading cover and manually remove the cap "J" fitted inside, then insert the pellet level sensor "3" from
inside the tank.
The sensor is locked to the tank by externally mounting the gasket "2" and firmly securing it with the ring nut "1".
The sensor must then be connected to position 14 on the circuit board with the cable supplied.
Technical Dept. - All rights reserved - Reproduction is prohibited
Technical Dept. - All rights reserved - Reproduction is prohibited
3
2
1
13
12
11
10
9
8
7
6
EN
14
1
2
3
5
4
25
Publicité
