Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
HP-960S Hi-Fi headphones
Item no. 1304737
Intended use
The headphones are designed to transform electric output signals from a headphones
output to acoustic signals (sound waves). The product is approved for connection to
the headphones output of audio devices only. Power is supplied via the connected
device.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Headphones
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• Do not wear the product in situations that require your undivided attention
(i.e. while driving or operating machinery or tools). This is a safety hazard
and poses a risk of injury!
• Do not listen to music at a high volume for an extended period of time. This
may damage your hearing.
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operation
To avoid distortion or maladjustments that may damage the headphones or
the connected audio device, the product may be connected to suitable
headphone outputs only. Please refer to the connection values under
"Technical data".
If your audio device does not feature a suitable headphones socket, use a
suitable adapter.
• Turn off the audio device to which you wish to connect the headphones.
• Turn down the headphones volume on the audio device all the way.
• Connect the jack plug to the headphones output on your audio device.
• Turn on the audio device.
• Adjust the volume using the volume control on your audio device.
Maintenance and cleaning
• The product is maintenance-free apart from occasional cleaning.
• Never submerge the product in water to clean it.
• Before cleaning, disconnect the product from the connected device.
• To clean, use a clean, dry, lint-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of
the environment.
Technical data
Power ....................................................max. 400 mW
Current consumption ..........................max. 5 mA
Connection ...........................................3.5 mm jack plug
Frequency range .................................15 - 22000 Hz
Sensitivity .............................................98 dB ±3 dB
Impedance ...........................................32 Ω
Operating conditions ..........................0 to +40 ºC, <70 % RH (non-condensing)
Storage conditions..............................-5 to +55 ºC, <85 % RH (non-condensing)
Cable length .........................................2.5 m
Speaker driver .....................................40 mm
Dimensions (W x H x D)......................200 x 150 x 70 mm
Weight ...................................................170 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
V1_0315_02-ETS-Mkd
Publicité
