3TECH TURBINE Ti-940L Mode D'emploi page 14

TURBINE Ti-940L can o er the patented drive air pressure regulating system (Patent No.ZL2013 20060022.8) to maintain a stable supply of the
pressure to the turbine to reach consistent rotation and hence better cutting e ect.
Coupling system available in the Ti-940L turbines:
Type Compatible with other brands speed coupling
KaVo LED KaVo MULTIfl ex LUX
® ® ®
Sirona Sirona LED coupler
® ®
W&H ® W & H ® Roto Quick
Bien Air Bien-Air Unifi x LED Coupler
® ® ®
NSK NSK PTL-CL coupler
® ®
5. Specifi cations and type
Head type Torque head
Speed range 320,000 rpm - 350,000 rpm
Power ≥ 22 W
Retention power ≥ 30 N
Nozzle spray mode 4-port spray
26
Notice
K2 with spray ring
With spray ring
With spray ring
B2 with spray ring
With spray ring
Bur removal Push button
Bur specifi cations As per ISO1797-1
Coupling type LED coupling
Voltage of LED Bulb 3 V
Illumination ≥ 25 000 LUX
Drive air pressure 250 ± 10% kPa (2.5 ± 10% kgf/cm²)
Air consumption 40 Nl/min ± 10%
Recommended water amount > 50 ml/min
6. Assembly and removing the medical device
6.1 When LED coupling KAVO Multifl ex
®
6.1.1 Assemble the LED coupling and attach the medical device
– Screw the LED coupling onto the turbine hose (Fig.6-1 ).
– Tighten the screw cap of the turbine hose with the wrench (delivered with the medical device) (Fig.6-2
– Assemble the medical device accurately on the LED coupling until it audibly locks in the medical device (Fig.6-2 ).
6.1.2 Removing the medical device
Hold the LED coupling tightly; pull the medical device o while twisting slightly (Fig.6-3 ).
is assembled
®
).
27