____________________________________________________________________________________Wiedenmann GmbH
2.3. Important points for correct operation
Please observe the following steps
upon reaching the lawn to be worked
on:
1. Fully lower the accessory
equipment.
2. Inspect, if necessary, reset the
weight transfer setting.
3. During operation, the rear
wheels must always remain on the
ground.
4. The four-wheel drive facilitates
operation.
5. After completing the operation
or when an obstacle is
encountered, retract the lifting
piston of the hydraulic cylinder
fully.
6. Take off the accessory equipment
with the 3-point linkage of the
tractor.
CAUTION
Before lifting the installed
machine, the lifting piston of
the hydraulic cylinder must be
fully retracted.
When the installed machine has
been lifted out, the hydraulic
cylinder must not be extended.
Nonobservance results in a
greater risk of the parts
becoming warped and consequently
damaged.
9