Installation - nexstyle BATH Roma Manuel De L'utilisateur

Installation

FAUCET INSTALLATION
CAUTION: To avoid risk of property damage, follow these instructions closely . Failure
to follow these instructions may result in property damage caused by leaks at these
connections .
Do not use thread seal tape or other sealants on these water line connections .
- Insert the sprayer housing support (C)
through the chosen mounting hole in your
sink . Screw the nut onto the threads and
hand tighten .
- Ensure all fittings and end connections are
free of debris .
- Run the sprayer hose (1) down through the
sprayer housing support (C) and up through
the centre faucet mounting hole .
- Connect the sprayer hose (1) to the supply
outlet using a wrench . Do not over tighten .
- Install the faucet in the sink with hot water
handle (marked with an H or red indicator)
on the left and cold water handle (marked
with a C or blue indicator) on the right.
From under the sink, thread mounting nuts
(3) onto the faucet shanks (2) and tighten
the mounting nuts (3).
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance.
Sprayer (B)
Sprayer Hose (1)
Sink
Faucet shank (2)
Sprayer hose (1)
Mounting nut (3)
5
Sprayer housing
support (C)
Nut
Fig . 2
Sink
Fig . 3
CONGLOMKB.COM