Publicité
Les langues disponibles
Les langues disponibles
Operations
To prevent damage to your eyes, never look directly into the light
source.
Connect the mains cable provided to the mains jack (3) and then to a
socket (230 V~ / 50 Hz). The unit is then ready for operation and may
be operated via a DMX light controller or may independently execute the
control program that has been set.
For DMX control, connect DMX cables to DMX IN (5) et DMX OUT (6).
To define the unit settings, use the system menu which can be operated
with the buttons (1) and the display (2). After power switch-on, the moving
head will first conduct a reference move for position adjustment; then the
operating mode most recently set will be indicated on the display.
Auto Mode - without DMX controller
The unit provides automatic show programs, no need controller ! just
Plug&play.
1) Press the button MENU until the display indicates : SLnd.
2) Press the button ENTER to confirm your choice.
3) Press the button UP&DOWN, select the desired mode: MASTER
4) Press the button ENTER to confirm your choice.
5) Press again on MENU button until the display indicates SHnd
6) Press the button ENTER to confirm your choice.
7) Select now a show between 4 shows: SH0,SH1,SH2 and SH3. THe
SH0 is recommended.
8) Press the button ENTER to confirm your choice.
9) Press MENU to quit
Music Mode - without DMX controller
1) Press the button MENU until the display indicates : Soud.
2) Press the button ENTER to confirm your choice.
3) Press the button UP&DOWN, select on
4) Press the button ENTER to confirm your choice.
5) Press MENU to quit
12
Publicité
