CompuSTAR 2WR5R-SF Guide De Mise En Route Rapide page 2

REMOTE USER FEATURES
1 quick TAP THEN HOLD for 5 seconds to ENTER the remote user option. Once a selection is made
+ 5
it will automatically exit the user option.
FEATURE
Enter remote user option as shown above: Tap
Proximioty
Unlock unlock feature. Flashing
Enter remote user option as shown above: Double Tap
Silent
mode
beep. Flashing
Enter remote user option as shown above: Hold
Power
down
power down the remote. NOTE: HOLD
To reprogram your remote, cycle the key in the ignition 5 times within 7 seconds. Parking lights will flash. Then tap the
Lock button on your remote. Repeat for any additional remotes. All remotes must be programmed during one sequence.
If you receive two parking light flashes, your Compustar has exited remote programming mode and you must retry.
Questions/comments? Contact us at 888-820-3690 from 8 AM to 5 PM PST. Also please visit
www.compustar.com for a complete user's manual.
2WR5R-SF_QuickCard line 20200814.indd 2
QUICK START CARD
FUNCTION/DESCRIPTION
icon indicate ON Flashing
icon and beep indicate ON Flashing
8102REUCL002300 // 2WR5R Guide REV1.0
1 time to enable/disable the proximity
icon idicates OFF.
button to enable/disable remote
icon idicates OFF.
button for apporoximatly 5 seconds to
button for 4 seconds to power up.
2WR5R-SF
Firstech, LLC. | 2
2020/08/14 10:20:21