Medicinalis 303894 Manuel page 26

2. Briefly press the "On / Off" button to scroll down. The "*" symbol moves
down to the next line every time you press the "On / Off" button briefly
and indicates which settings you can edit.
3. Select press the desired setting option and press and hold the "On / Off"
button for about 3 seconds to edit the corresponding settings. If you want
to edit the values a little faster, keep the "On / Off" button pressed.
Note: If you configure the "+/-" function to "+", the values described in Section
3 can be increased. If the function is set to "-", the values can be decreased (as
mentioned in Section 3).
4. If the pulse oximeter now reaches the corresponding alarm value, a beep is
heard as long as the alarm value is exceeded!
7. Perfusion index
The perfusion index (PI) is a relative assessment of the pulse strength at the site
of measurement using the pulse oximeter.
8. Evaluating the readings
The following table shows an approximate evaluation. This evaluation is just a
help. You should consult your doctor for a more detailed evaluation.
Oxygen saturation (SpO2)
94 % - 99 %
90 % - 93 %
<90 %
26
Evaluation
Normal range
Low range (better to consult a doctor)
Critical range (consult a doctor immediately)
English