Protocole : lecteur multi-carte - Marin Ce produit est conforme aux exigences des directives européennes 1999/5/CE et 2014/53/UE. La déclaration CE de conformité est téléchargeable à partir de notre site web www.cdvi.com 2] INTÉGRATION AUX LOGICIELS CDVI Le fonctionnement de l’enrôleur de badges est intégré aux logiciels ATRIUM (à partir de la version V3.2.33), CENTAUR (à...
MANUEL D’INSTALLATION R125USB Enrôleur de badges 125 Khz Comportement après insertion de l’enrôleur La détection est automatique L’indicateur de présence de la clef (5) passe au vert. Les identifi ants de l’enrôleur apparaissent : sa dénomination (en Anglais) et ses références (VID-PID : 04D8-F8B7).
The R125USB take-on reader was integrated in Atrium software from version v3.2.33, in Centaur software from version v5.2.81 and in TERENA. For any other use (or earlier versions of CDVI software), please install the USB Software. Refer to the installation section as shown below.
Page 5
INSTALLATION MANUAL R125USB USB Take-on reader Information about take-on reader - Detection is automatic. - The take-on reader (5) turns green. - ID number (in English) and serial number (VID-PID: 04D8-F8B7) are displayed. - The satus light is red if the take-on reader is offl...