YEAZ SUP HAND PUMP Mode D'emploi page 3

INFLATE
1. Screw the hose onto the opening marked „OUT".
2. Insert the other end into the valve of the SUP board.
3. Move the handle up and down.
4. Switch to single stroke mode if high air pressure in the board
makes inflation difficult. To do this, remove the cap on the
head of the pump.
DEFLATE
1. Push the air out of the SUP board by hand.
2. Screw the hose onto the opposite side of the „OUT" opening.
3. Insert the other end into the valve of the SUP board.
4. Move the handle up and down.
TECHNICAL DATA
• DIN EN 16051
• Maximum pressure up to 26PSI
• Rotatable pump adapter for comfortable hose connection
• Anti-Sand-Filter
• High-Airflow technology for easy inflation
• Single/Double Action lifting mode
• Shockproof pressure gauge
• Capacity 1.8+1.8L
© VEHNS GROUP GmbH
EN
3