Preparing The Appliance - Krups MG705 Mode D'emploi

PREPARING THE APPLIANCE

1
Setting
1
3
2
Preparation
5
7
2
OK
4
6
8
1 Remove all packaging materials, stickers
and accessories from the inside and the
outside of the appliance. The handle
sticker on the cooking level indicator can
be changed, according to the language.
You can replace it with the one on the
inside of the packaging.
2 Before using for the first time, thoroughly
clean the plates with warm water and
a little dishwashing liquid, rinse and dry
thoroughly.
3-4 Position the removable drip tray at the
front of the appliance.
5 For the best results you may wipe the
cooking plates using a paper towel
dipped in a little cooking oil, to improve
the non-stick release.
5b Ensure that the bottom cooking plate
and the upper cooking plate are correctly
positioned in the product before the pre-
heating phase begins.
6 Remove any surplus oil using a clean
kitchen paper towel.
7 Connect the appliance to an outlet. (note
the cord should be fully unwound).
8 Press the On/Off button.
9