QEO FMR 800-M/C Mode D'emploi page 26

EN
D
CONNECTION TO CONSTRUCTION MACHINERY FMR 800-M/C
Magnetic connection directly to the machine, e.g. to the excavator arm or clamp connection to the
machine mast (mast diameter 40-50 mm).
Replacing the clamps with magnets
CONNECTION TO CONSTRUCTION MACHINERY FRD 807
- Integrated magnetic strips allow a connection to metal surfaces in the cabin.
- A strong suction mount for fixing to a windscreen.
Exchanging magnetic mount / suction pad
26
Remove the nuts and washers that secure the
clamps to the mounting pads.
Screw the magnets onto the mounting pads
(clockwise) and secure with the locking grub-
screw.
The suction pad is connected to the FRD 807
by a magnetic mount.
Attach the suction pad to the cabin windscreen.
Press the suction pad to the window and
turn the locking mechanism clockwise
(to remove turn anti-clockwise).
All FMR 800-M/C display functions are trans-
ferred to the FRD 807 remote display by RF
wireless transmission.
All functions can be observed
by the machine driver, even if the receiver
is out of sight.