Load Or Change New Media; Usb Data Connection; Install Lpe Software - Live Photonic LPS-200H Mode D'emploi

6.0 Load or change new media:

6.1 USB data connection:

The device can save the light sequences of up to 200
media. Sequences of 112 gemstones or 39 Bach flowers
are standard, depending on the design. You can also save
your own individual light sequence in addition to the
standard media.
A computer with a Windows operating system (from
Windows 7) and a USB connection is required for this. As
well as the LPE software, which you can download and
use for free at https://livephotonic.de/lpe.html.
Connect the device to a computer using the supplied USB
cable.
The driver for the device should install itself
automatically.
 
The device display should then show [USB].
USB

6.2 Install LPE software:

Download the LPE software. There is both a 32 bit. A 64-
bit version is also available.
Start the installation program LPEx86_Setup.exe or
https://livephotonic.de/lpe.html
LPE64_Setup.exe (for 64 bit version) and follow the
installation instructions.
Then start the Live Photonic Energetik Software.
In the [?] Menu under [Help] you will find instructions
and information about the functions of the software and
devices.
28