Introduction; Certification; About This Manual; Warranty - FLO-DYNAMICS CCST 388 Manuel D'utilisation

INSTRUCTIONS MANUAL

INTRODUCTION

This machine is ETL Laboratories approved, in compliance with SAE J2788. We are dedicated
to solving the issues surrounding the safe containment and proper management of refrigerants.
Your new machine incorporates the latest technology and state of the art features to aid you in
servicing HFC134a air conditioning and refrigeration systems. We hope you get as much
enjoyment using this equipment as we did designing and building it

CERTIFICATION

All technicians opening the refrigeration circuit in automotive air conditioning systems must now
be certified in refrigerant recovery and recycling procedures to be in compliance with Section
609 of the Clean Air Act Amendments of 1990. For information on certification call MACS
Worldwide at (215) 631-7020
.

ABOUT THIS MANUAL

This manual includes a SAFETY SUMMARY, MACHINE PREPARATION FOR USE,
OPERATION procedures, and MAINTENANCE instructions, for your Air Conditioning Service
Center. Anyone intending to use the machine should become familiar with ALL the information
included in this manual (especially the SAFETY SUMMARY) before attempting to use it.
Before operating this machine for the first time, perform all PREPARATION FOR USE
instructions. If your new machine is not properly prepared to perform a service, your service
data could be erroneous. In order to properly perform a complete air conditioning service,
follow all procedures in the order presented. Please take the time to study this manual before
operating the machine. Then keep this manual close at hand for future reference. Please pay
close attention to the SAFETY SUMMARY and all WARNINGS and CAUTIONS provided
throughout this manual. To activate the published warranty, mail the attached warranty card.
CAUTION: The machine is intended for indoor use only.
ABOUT YOUR CLIMA/CS AIR CONDITIONING SERVICE CENTER
Your machine incorporates a highly accurate electronic scale for determining charging weights,
etc. Other functions can also be performed with the electronic scale as you will discover during
the operating procedures. Either standard or metric units of measure can be selected. Your
new machine has been designed specifically to use R-134a, to operate within the objectives of
the Montreal Protocol.

WARRANTY

This product is warranted against any defect in materials and/or construction for a period of 1
(one) year from the date of delivery. The warranty consists of free-of-charge replacement or
repair of defective component parts or parts considered defective by the Manufacturer.
Reference to the machine serial number must be included in any requests for spare parts.
This warranty does not cover defects arising from normal wear, incorrect or improper
installation, or phenomena not inherent to normal use and operation of the product.
The manufacturer guarantees the perfect suitability of the materials used for packing, in terms
both of composition and mechanical strength/resistance. The guarantee does not cover
breakdowns attributable to damage suffered during shipping or warehousing or caused by the
use of accessories not meeting manufacturer's specifications, or to tampering with or repair of
the product by unauthorized personnel. It is of utmost importance that the crates containing
the machine be carefully inspected, upon delivery, in the presence of the shipping agent. We
recommend performing inspection with extreme care, since damages to the crates due to
shocks or dropping are not always immediately visible thanks to the shock-absorbing capacity
of today's composite packing materials. The apparent integrity of the packing materials does
not exclude possible damage to the goods, despite the due care taken by the manufacturer in
packing them
-7-