Medicura m356 Mode D'emploi page 6

1 - Air flow speed control switch
2 - Temperature control switch
3 - Cold shot button
4 - Air inlet filter
5 - Air concentator
6 - Diffuser
7 - Hook
This product has been manufactured in conformity to current 2006/95/EC and 2004/108/
EC.
Technical data indicated on the appliance.
The appliance has two separate switches for regulating the speed and air temperature.
The air speed switch (1) has 2 settings, MED and MAX + the 0 off position.
The temperature switch (2) has 2 settings, MED and MAX + the 0 position (cold air).
The appliance has a button (3) for a blast of cold air during hot air operation, used to fix
the hairstyle.
Releasing the button returns to the previously set mode.
The concentrator (5) for directing the air flow on the hair and the diffuser for giving the hair
volume are supplied with the appliance.
After use, switch the appliance off and detach the plug.
Clean the equipment thoroughly after each use with a soft and slightly damp cloth.
Never use abrasive products or chemical solvents.
Attenction: keep dry the appliance.
NEVER DIP THE APPLIANCE INTO THE WATER.
Cleaning the air inlet filter:
Make sure that the appliance is switched off and unplugged.
Remove the cover on the rear of the device, turning it in an anti-clockwise direction.
Remove the filter and wash it with water only.
Having carefully dried it, re-assemble it correctly by fitting the 3 fastening hooks in the
three slots and rotating in a clockwise direction until stoppage.
6
Technical informations
Instructions for use
Maintenance
5
3
2
1
6
7
GB
4
GB
GB