Publicité
Les langues disponibles
Les langues disponibles
-
Make sure the Cosibrixx, ceramic logs and lava rocks are completely cooled down.
-
Make sure the Cosibrixx is no longer connected to the gas bottle.
-
On the control panel you will find a smaller black button besides the control button. This is the ignition
where you will find the battery.
-
You can now twist the black ignition open and place the battery on the ignition, according to the
instructions. Please mind the +/- sides.
-
The old battery should be returned to a collection point.
6. Moving the unit
It is advisable to move the Cosibrixx as little as possible. With every move you risk damage to the Cosibrixx. If
you still want to move the unit, make sure that the Cosibrixx is shut off from the gas bottle. The new location
for Cosibrixx needs to be clean, flat and hardened again.
8. Installing the cover
For each Cosibrixx an all-weather cover can be purchased separately. This protects your Cosibrixx against weather
influences. Only place the cover when the Cosibrixx is completely cooled down. If you place the cover
immediately after usage of the device, the cover will gain damage and possibly even catch fire.
7. Placing the cover plate on the Cosibrixx
You can easily place the supplied cover plate on the Cosibrixx burner.
First remove the ceramic logs (ensure that they have cooled down
completely) and place the cover plate on top of the burner. The cover
plate can easily be removed through the opening in the corner (see
picture)
WARNING: Only place or remove the cover plate when the Cosibrixx
is not in use.
14
Publicité
