Serene House Serene Pod Magic Jar Mode D'emploi page 5

Operating Instructions
• Please remove all packaging before use.
1
Peel away the color
film seal only on the
Serene Pod ® . Do not
remove the
transparent micro
perforated film on
the inner layer.
2
Place Serene Pod ® onto the
heating plate.
Caution:
®
1. Only Serene Pod from SERENE HOUSE can be used with this product; do not heat liquids or
other objects in the heating plate.
®
2. Serene Pod can be heated repeatedly. If the scent fades or the diffusing performance drops,
please consider replacing the Serene Pod
contact your local retailer for purchase.
3. Do not move or touch when this product is in use. Allow the wax inside Serene Pod
thoroughly into a solid form before handling the device or Serene Pod
4. Unplug from power source when not in use.
5. Always place this wax warmer on a firm, flat and level surface.
6
3
Place the top cover
back onto the main
unit.
4
Plug into power
source.
5
Turn on the power
switch.
® . The Serene Pod ® is a consumable item; please
® to cool
® .
Maintenance
• Always disconnect the product from its power source prior to maintenance.
• Never soak or wash this product directly as it may cause mechanical malfunction
or danger.
• Never use acidic cleansing agents as it may cause malfunction to the product.
• Please perform maintenance at least once a week; failing to do so may cause
the product to malfunction. Please maintain it on a regular basis.
1
Turn off the power
switch.
2
unplug from
power source.
3
Remove Serene
Pod ® .
4
Please use a damp
cloth moistened with
warm water and
neutral cleaning
agents to clean the
heating plate until it is
clean. Place the
Serene Pod ® back onto
the heating plate and
Place back the top
cover. This completes
the maintenance
process.
7