KaVo EWL 4061 Mode D'emploi page 23

• Operate the HF Motor-Spindle
EWL 4061 and 4063 only with a tool or
test pin fitted. It is essential not to subject
the fitted tool to jolts or impacts.
• Use only tools free of unbalance.
• Regulations for the prevention of
accidents are to be observed!
• Permitted max. speed, forward feed and
further specific instructions indicated by
the manufacturer are to be observed.
• Any liability shall be excluded if defects
or the consequences thereof are due to
manipulation of or modifica-tion to the
product by the customer or by any third
parties not authorized by KaVo EWL.
Spindle EWL 4061 / 4063
GB
OPERATING INSTRUCTION
5