H+H babyruf MBF 7010 Mode D'emploi page 17

Setting the volume
[6] Raise the volume.
[8] Lower the volume.
Setting the feed alert/time
You can set a feed alert/time to be sounded at a specific time or at specific intervals.
If you set a feed alert/time to be issued at intervals, ensure that the date and time are set correctly.
Setting the feed time
Example: 12.30 p.m.
Feed time
[9]
[5]
Setting the feed alert at an interval
Example: 2 hours 30 minutes
Feed time
[9]
[5]
Activating the feed alert at intervals
Feed time
[9]
Deactivating the feed alert at intervals
Feed time
[9]
Setting the volume of the feed alert
Feed time
[9]
The feed alert can be stopped by pressing any button on the receiver unit.
Paging
If you have misplaced the receiver unit and cannot find it, simply use the Paging function. The receiver unit
then issues a loud acoustic signal.
On the transmitter unit
5 sec. [20]
The acoustic signal can be stopped by pressing any button on the receiver unit.
Voice activation
The voice activation facility (Vox function) is activated by default. As soon as the transmitter unit registers
acoustic signals, they are transmitted to the receiver unit.
Set Time Hour / Minute
Set Time Set Interval
Set Interval
Set Interval
Set Interval
The receiver unit issues a loud acoustic signal.
Define the setting (12.30).
Define the settings (2 hours 30 minutes).
On?
Feed alert is activated.
Off?
Feed alert is deactivated.
High / Low
G
17