camry CR2316 Mode D'emploi page 4

immediately remove the power plug or power adaptor from the socket. If the device is
powered, do not put hands in the water. Have the device checked by the qualified
electrician before using it again.
18. Do not touch the device or power adaptor with wet hands.
19. The device has to be turned off after every use.
20. Do not leave the unit on to the wall outlet or power supply unit unattended.
21. If the device utilises a power adaptor, do not cover it, because this can cause a
dangerous temperature rise and can damage the device. Always connect the power
adaptor cable to the device, and then connect the power adaptor to the power socket.
22. Keep the device out of the reach of children. Using the devices by children must be
supervised by adults.
23. The power cord should not touch hot parts of the device and should not be located near
other heat sources.
24. Do not wrap electric cable around the device.
25. Do not use the appliance in the bath.
26. Do not remove dust or foreign bodies from the inside of the hair straightener using
sharp objects.
27. Do not use outdoors or where aerosols are being used or where oxygen is being
administered.
28. Do not cover the appliance, it might cause the accumulation of heat in its interior and it
may cause damage or fire.
29. Hairsprays contain flammable materials. Do not apply them while using the device.
30. Do not use the device on people who are sleeping.
31. The device can be supplied only with the voltage specified on the housing.
32. During operation, do not place the device on wet surfaces or clothes.
33. After use, turn off and unplug the unit. Wait until the device cools down before storing.
34.During the operation ceramic plates heat up to high temperatures. Do not touch hot
parts of the hair curling iron and do not allow contact with the skin of the head, because it
may cause burns
35. The device is not designed to work with external schedulers or separate remote control
system.
DESCRIPTION OF THE DEVICE
1. On/Off button
4. Blue LED display
USING THE DEVICE
To achieve the best results in hair straightening, use a device on washed, brushed and dry hair. To prevent hair damage, make sure to
use the correct temperature setting for your hair type.
1. Before starting the device, the electrical wire should be fully unrolled.
2. Insert the plug into the socket.
3. Press and hold the On/Off button (1) about 2 seconds until the unit turns on and LED lights up.
4. Adjust the temperature using the temperature buttons (6). During heat up time, the LED temperature display will pulse from 0 to 8 blue
lines until the desired temperature is reached. When the appliance reaches the desired temperature, the pulsing will stop, the correlating
bars (1-8) will be displayed. Wait 15 seconds to allow the appliance to reach its working temperature.
Temperature Lock Mode:
− Activating: Press On/Off button 2 times. All the keys will be locked and the lock symbol will display the lock symbol.
– Unlocking: Press On/Off button 2 times. All the keys will be unlocked and the lock symbol will disappear.
5. Starting from the top of the head to choose a small strand of hair and straighten it and comb.
6. Then put it between the hobs (3)
7. Move slowly awayin the direction from the roots to the ends of hair.
NOTE: The unit is hot during operation. Do not touch the hobs to the scalp or hands.
8. Repeat with the next until all the hair bands will be stretched.
9. Wait until the hairs cool down and comb it.
2. Handle 3. Hobs
5. Lock 6. Temperature setting +/- buttons 150ºC - 160 ºC ... - 230ºC
4